Double -walled tanks and their capacity are generally 2 liters and in some cases based on the capacity of the machine and the type of product product. 2- Material heater in tanks by hot oil circulation system and removing hot water circulation and non-damage to the tank walls 2_ The path heating system by element hose in some models according to the production of the product 2- System Materials Inside Tanks in All Types of Foam Injection Machine 2- PU and ISO Material Transfer Pumps from MVP and Keratin Rocket Europe and Italy 1_ Italian steel foam injection head nozzle canon and Keratitis Caffeine specific and complex solgasculation in mix and wash, as well as permanent circular system of head -to -heading head -to -heading head without having to cut off the pump and mixing capability at 4 rpm, as well as cooling and cooling system. Software and control system, PL C, LCD Taus Control Panel 2_ Automatic circulation system as well as holiday circulation circulation Frequency Electro Control Material Transfer Pump engines (inverter) 1- System of tank loading automatically and separately 2_ Ability to inject with stored application and save the new product application settings and injections with different time and ratio Two separate washing tanks with two detergent material capability 1_ Removable canvas with a rotation angle of 2 degrees and a length of 2 meters in fixed mold injection machines 1- Cooling and Heating System of PU and ISO Materials 1_ Automatic surface gauge of material tanks and washing 1_ Compressed Air Care Unit in detergent tanks and in required devices as well as in materials 2_ Materials in all machines and foam injection machines are high in high pressure life and in some cases have a heated manufacturer as needed. 18. Adding automatic and automatic paint system from special tanks and pumps to the transmission system and infusion nozzle for the paint system, which is mostly welcomed in the shoe and linen foam injection machine to produce 2 or 4 colors. The benefits of this type of devices are the following: 2. Low price compared to hyperpressor and easy maintenance and low cost for foam injection machine in Iran 2- By purchasing a PU -Loprser Foam Injection Machine Ability to inject a wide range of different materials and density in the weight category of the material output of the machine Other dedicated specifications of each type of PU -PU -foam injection device can be seen by logging into the relevant screen of the same device.